KPIT Ground/Ramp, KPIT Tower, KPIT Appreach/Departure

[EdGeneer]

No brother named Gary.... (if you meant that question towards me, that is )

[PIT]

It was for me, yes I do

[atc614]

yah i work with him and i had mentioned that i use this website alot because im an atc major. he told me that you had a set up and i showed him your pics and he confirmed it was you.

[PIT]

haha, small world. He graduates in May so ill be down for that. He will have to introduce me to you.

[PIT]

New antenna and coax run. The antenna is obviously a J-POLE.

[spudsmac]

yah i work with him and i had mentioned that i use this website alot because im an atc major. he told me that you had a set up and i showed him your pics and he confirmed it was you.

You go to Riddle?

[smeuse]

What would be interesting would be a graphed curve on both units, because the specs explain some notches but state different useable frequency ranges. The one from scannermaster states useable frequencies start back at 118.000+ and the one from universal radio state the notch ending at 108.000... i wonder if the 118 up is giving 118 at untouched dB reduction.

a little late, but....

Here is a sweep of the HPN-30118. My service monitor doesn't have markers, so I had to add some graphics.

[EdGeneer]

Cool, thanks.... If I'm reading the first one correctly, you can really see the 30db drop... Thanks for posting those...

[mtindor]

a little late, but....

Here is a sweep of the HPN-30118. My service monitor doesn't have markers, so I had to add some graphics.

Would I be correct that in your full notch (pic #1), those are 100 Mhz segments on the scope?    And on the second pic (showing VHF-low and the FM notch) those are 10 Mhz segments?

I am thinking about getting one of these, but I feed multiple scanners and I'd really hate to be 10 db+ down from 34 Mhz and lower.   I was hoping the high pass filter effects would be minimal at 30 Mhz.

mike