Welcome, Guest. Please login or register.
Did you miss your activation email?
May 30, 2016, 04:24:42 PM
Home Help Login Register      
News: Check out: Air Race Classic 2016

+  LiveATC Discussion Forums
|-+  Air Traffic Monitoring
| |-+  Listener Forum (Moderators: dave, RonR)
| | |-+  ATC - hearing only the controller
« previous next »
Pages: [1] Go Down Print
Author Topic: ATC - hearing only the controller  (Read 2526 times)
Offline Offline

Posts: 1

« on: December 27, 2013, 12:24:03 AM »

I find on some frequencies, for the most part, I hear only the controller, not the aircraft.  It is a one-sided communication.  An example is CYYZ Arrival.  Presumably two frequencies are being used.  I am wondering if there is any way I can overcome this when I encounter it.

Jr. Member
Offline Offline

Posts: 94

« Reply #1 on: December 27, 2013, 10:51:50 AM »


Just took a quick listen to CYYZ Arrivals and both controller and aircraft can be heard. Could be they were using a frequency
not covered by LiveATC for the arrivals at the time you were listening. If you have a scanner and live close enough to the
airport you could listen to the arrival frequencies shown in LiveATC and see if you hear the aircraft on your scanner. You may
not hear the controller side, all depends on your location. Since you heard the controller side on LiveATC, doesn't seem likely the problem is with your computer.

Hero Member
Offline Offline

Posts: 787

« Reply #2 on: December 27, 2013, 12:45:46 PM »

An example is CYYZ Arrival.

Was this in the late evening or overnight ? On the midnight shift they combine the arrival and departure positions and put all the aircraft on the departure frequency 128.80 (not covered by that LiveATC feed), but the controllers keep transmitting on the arrivals frequencies. 
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!