Welcome, Guest. Please login or register.
Did you miss your activation email?
October 01, 2014, 08:20:22 PM
Home Help Login Register      
News: NEW Follow LiveATC updates on Twitter and Facebook


+  LiveATC Discussion Forums
|-+  Air Traffic Monitoring
| |-+  Listener Forum (Moderators: dave, RonR)
| | |-+  KISM Status
« previous next »
Pages: [1] Go Down Print
Author Topic: KISM Status  (Read 1816 times)
TonyP123
Newbie
*
Offline Offline

Posts: 8


« on: March 15, 2013, 08:01:50 AM »

Well, I don't know long this has been the issue on the feed. I noticed the multiplexer for my antennas took a dump. It's been introducing a hum into the radios, to which it's being transmitted into the feed. I pulled it out of the antenna line and made a direct connection to the receiver. I will try to improve my signal to my radio by duplexing another antenna to the radio as a band-aid  ...1dB increase would make my happy.. Weekend project.

I have also added a noise filter into the audio cable between the radio / computer. This should have adjusted my audio unbalance between the two. I will work on tweeking the filter this weekend. Built a 50 dB PAD filter and I will replace the fixed value resistors with a var-resistor. If I can get rid of the hiss, I will do cart wheels. lol

Thanks to the KISM listeners for you patience.  smiley 
tony
Logged
dave
Site Founder
Administrator
Hero Member
*****
Offline Offline

Posts: 3657



WWW
« Reply #1 on: March 15, 2013, 08:03:05 AM »

Thanks Tony!
Logged
InterpreDemon
Sr. Member
****
Offline Offline

Posts: 420



« Reply #2 on: March 15, 2013, 06:26:20 PM »

Tony - Good luck on the hiss, but I think the real problem is that your receiver just has a poor squelch gate. Anything that filters that out is going to make the desired audio sound like it's going through a sock. Only solution is either modify the rig or brew up an external squelch, which would be pretty easy... one quad op-amp and a handful of resistors and caps. Could tailor some nice audio, too. Sounds to me like you have two different receivers... what's the setup?
Logged

Feed Purveyor:
KJFK ARINC
KHPN ATIS
(KJFK) NY DEP Liberty East
HF CAR-A  3455/5550/6577/8846/11396
HF ARINC LDOC  6640/8933
HF NY VOLMET  6604

Complaints should be addressed to: City Hall
TonyP123
Newbie
*
Offline Offline

Posts: 8


« Reply #3 on: March 21, 2013, 07:23:07 PM »

The main radio is an AOR AR5000  kinda over kill for this task. I have it connected to a SCANTENNA .
One of the secondary radios I have is a Uniden 780XLT...which BTW is an excellent VHF radio but has been made obsolete on our police trunk (rebanded).

The best part of the AR5000 is its' built in filters of 5 different settings relating to the audio characteristics.I also have available the Audio De-emphasis feature. I don't use it much but did turn it on as of this recent issue I have.

 I was able to make adjustments to the I.F bandwidth. I have it set to 6kHz .  I'm not sure if I like the way it sounds.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!